S110S: SAP2000 v22 Hands-On Training (Malaysia)

Date

16 Jun 2020 (Tue) - 17 Jun 2020 (Wed)

Time

9:00 am - 5:00 pm

Venue

Level 13-06, Menara MBMR, No.1, Jalan Syed Putra
58000 Kuala Lumpur
Malaysia

Notes
  • Early-bird fees only valid for registrations received by 18 May 2020.
  • 20% discount for registration of a group of 3 and above. (Not applicable to Early-bird registration)
  • Participants are required to bring their own laptops with networking capability.
  • Training License will be provided.
Download Registration Form Now »

Course Objective

This short course aims to provide engineers with an overview of the fundamentals and capabilities of SAP2000 for Structural Analysis and Design of typical Structures including both Reinforced concrete and Steel. The course will cover primarily linear and static analysis but will cover some aspects of non-linear and dynamic analysis at an introductory level.

Course Outline

Introduction to SAP2000 System

  • Overview of SAP2000 v19 GUI system
  • Understanding SAP2000 analysis and design capability
  • Workflow in SAP2000

Modelling of Frame Structures

  • Overview of 1D finite elements (FE) objects
  • Loadings and elements forces
  • Joint modelling
    • Rigid Zone and End Length offset for RC structures
    • Panel Zone for Steel structures
  • Constraints 
    • Rigid diaphragm
    • Body and Equal
  • Modelling with P-delta
    • P-D and P-δ
    • Simplified P-delta analysis
    • Direct P-delta analysis
  • Steel structure analysis and design with Direct Analysis
    Method (DAM)

Modelling of Floor/Wall Systems

  • Overview of 2D FE objects (Membrane, Plate & Shell)
  • Area Elements forces and stresses
  • Loadings
    • Floor (FEM vs. “Yield-line” method)
    • Wall loading through Joint Pattern
  • Meshing of 2D FE elements
  • Constraints (Auto-line constraints)
  • Stiffness modifier
    • Cracked section properties
    • 1-way load transfer for slab

Modelling of Shell (floor and wall) systems

  • Overview of 2D finite elements objects (Membrane, Plate & Shell)
    • Elements stresses and forces
    • Loadings
  • Floor loading (FEM vs. “Yield-line”)
  • Wall loading (Pressure loading with Joint Pattern)
  • Meshing of 2D Shell
    • Automatic Area mesh
    • Manual Area mesh
  • Constraints (Auto-line)
  • Stiffness modifier
    • Cracked section properties
    • 1-way load transfer for slab
  • Beam-Slab interactions for RC floor
  • Section-Cut to extract shell stresses and forces for Floor and Wall Pier
  • RC Structure analysis and design
    • Modelling of Couple Wall System
    • Typical RC building analysis and design

Advanced Modelling and Analysis

  • Beam-Slab Interaction
  • Stage Construction for Transfer System
  • Buckling Analysis
  • PT tendons as forces or elements
  • Cable elements with automatic initial profile and target load

Advanced Analysis with SAP2000

  • Stage construction
  • Buckling analysis
  • Cable elements with automatic initial profile and target load analysis
  • Using PT tendons as loads or physical elements
  • Virtual work diagram for displacement optimisation

Speaker Profile

Choo, June ShyanP.E
MSCE, MPW, BSCE M.ASCE (USA), M.SEI (USA), MIES, MSSSS

Er. Choo is a Singapore Registered Professional Engineer with many years of consulting experience both in Singapore and USA. In USA, he was a consultant with Dietrich Industries, Inc. and designed many Light-gauge steel frame structures scattered over USA. He also spearheaded Dietrich Industries’s first IT project worth USD 4 millions which enable their engineers to model, analyse and design any steel structures in 3D with automatic shop drawing generation. In Singapore, he was a consultant at CPG Consultants Pte Ltd where he designed and supervised many building projects.

He is currently the Technical Director of Otte Group of Companies, which specializes in advanced and innovative IT solutions for Building, Structural and Geotechnical Engineering professionals. Er. Choo has extensive experience in computer-aided analysis and design with advanced engineering software. He has conducted numerous training courses and seminars in Singapore, Malaysia, and overseas.

Er. Choo graduated with Master of Public Works, and Master of Science in Civil Engineering with a Full Academic Merit Scholarship from University of Pittsburgh, Pittsburgh, Pennsylvania, USA. He was awarded the Chi Epsilon (National Civil Engineering Honor Society, USA) scholarship in the Metropolitan District, the National Dean’s List and School of Engineering Dean’s List in his undergraduate studies in the same university.

Terms and Conditions

  • Due to limited seats, registration is on a first-come-first-served basis. Training seats will be confirmed upon receipt of payment.
  • Cancellation of registration notice must be made in writing if you are unable to attend. Course fees refund as follows:
    • Notice received 14 days prior to course date – 90% refund.
    • Notice received 7 days prior to course date – 75% refund.
    • Cancellation will not be accpted if notice is received less than 7 days before the event; but a substitute delegate is welcomed at no extra charge