Leapfrog Works helps you visualise and understand your data so you can communicate risks with stakeholders of all technical levels – and make better decisions on all your civil engineering and environmental projects.
CSi Software
IDEAStatiCa
GEOSLOPE Individual
GEOSLOPE Bundle
Geocentrix
Seequent
AIR/W
AIR TRANSFER ANALYSIS
AIR/W is a powerful finite element software product for modeling air transfer in mine waste and other porous media. AIR/W can be used to model a range of scenarios, from simple single phase air transfer problems to complex coupled air-water systems.
The true power of AIR/W is unlocked when it is coupled with TEMP/W to model forced-convection heat flow and density-dependent air flow. This type of analysis is important for studying mine closure, acid rock drainage, or gas transfer.
CSiBridge
INTEGRATED 3-D BRIDGE ANALYSIS, DESIGN AND RATING
CSiBridge is a state-of-the-art software product for the structural and seismic analysis, design, and rating of simple and complex bridges. All operations are integrated across a single user interface that provides an easy-to-use and intuitive workflow environment. Bridge models are created parametrically resulting in enhanced productivity, saving engineering time while redefining the standards of accuracy and versatility. Advanced modeling features and sophisticated analysis techniques account for dynamic effects, inelastic behavior, and geometric nonlinearity. Code-based templates streamline the engineering process from model definition through analysis, design optimization, and the generation of comprehensive output reports. CSiBridge is the premier software for bridge engineering.CSiCOL
DESIGN OF SIMPLE AND COMPLEX REINFORCED CONCRETE COLUMNS
CSiCOL is a comprehensive software package used for the analysis and design of columns. The design of columns of any concrete, reinforced concrete, or composite cross-section can be carried out by the program. CSiCOL provides a ‘Quick Design Wizard’ tool that guides the users step-by-step, through the whole process of column design. This makes the design process simple, organized and efficient. The design can be carried out in accordance with ACI-318-11, ACI-318-08, ACI 318-05, ACI 318-02, ACI 318-99, BS8110, CSA A-23.3-04, CSA A23.3-94, Eurocode 2-2004 and IS 456-2000 codes.CSiDetail
CSiPlant v5
Integrated Software for Design of Piping and Structural Systems
CSiPlant is an integrated engineering software product for analysis and design of piping systems and frame structures, including piping code compliance checks with stress-intensification and flexibility factors that are automatically calculated and applied. CSiPlant offers advanced analysis technology to piping and structural engineers working in the process, power, pipeline and offshore industries.CSiXRevit
BI-DIRECTION DATA TRANSFER PLUGIN FOR REVIT®
CSiXRevit is a plugin for Autodesk Revit® that enables bi-directional data transfer to CSI Software products: SAP2000®, ETABS® and SAFE®. CSixRevit supports four (4) main workflows of data transfer with Autodesk Revit®:- Exporting from Revit® to create a new CSI Software model.
- Exporting from Revit® to update an existing CSI Software model.
- Importing from CSI Software to create a new Revit® Model.
- Importing from CSI Software to update an existing Revit® Model.
CTRAN/W
SOLUTE AND GAS TRANSFER ANAYLSIS
CTRAN/W is a powerful finite element software product for modeling solute and gas transfer in porous media. CTRAN/W can be used to model simple diffusion-dominated systems through to complex advection-dispersion systems with first-order reactions.
CTRAN/W can be used to model a vast array of geo-environmental problems involving the movement of dissolved species or gases that originate from either man-made or naturally occurring sources.
ETABS
INTEGRATED ANALYSIS, DESIGN AND DRAFTING OF BUILDING SYSTEMS
ETABS is a sophisticated, yet easy to use, special purpose analysis and design program developed specifically for building systems. The innovative and revolutionary new ETABS is the ultimate integrated software package for the structural analysis and design of buildings. Incorporating 40 years of continuous research and development, this latest ETABS offers unmatched 3D object based modelling and visualization tools, blazingly fast linear and nonlinear analytical power, sophisticated and comprehensive design capabilities for a wide-range of materials, and insightful graphic displays, reports, and schematic drawings that allow users to quickly and easily decipher and understand analysis and design results.Geocentrix Repute
Repute boasts a powerful calculation engine and a rich user interface making it the UK's leading onshore pile design program.
The program includes a wide range of engineering capabilities for designing single piles to modern design standards and analysing pile groups in 3-dimensions using linear and non-linear soil models.
Repute is supplied with comprehensive documentation (including a user-manual, reference manual and quick-start guide); includes extensive built-in help; and is backed up with expert technical support.
Geocentrix ReWaRD
ReWaRD is one of the leading programs for the design of embedded retaining walls, incorporating several UK and international design standards including BS 8002 and Eurocode 7.
Designed by engineers for engineers, ReWaRD draws upon the technical expertise of Geocentrix to produce the most powerful and user friendly set of tools for retaining wall design.
Geostudio Basic
Combine Analyses and Geometries in a Single, Integrated Project
The integrated GeoStudio software suite allows you to combine multiple analyses using different products into a single modeling project. You can then use the results from one analysis as the starting conditions for another one. New analyses can be easily created by cloning an existing analysis and adjusting its properties. When you are ready to analyze the model, GeoStudio solves the analyses in the appropriate order, taking advantage of parallel processing. This unique and powerful feature greatly expands the types of problems you can analyze. Use this approach to model construction sequences, establish initial conditions, perform sensitivity analyses, model complex time sequences, or simply decompose a complex problem into a number of smaller, more manageable analyses. Included with the purchase of any GeoStudio single product or bundle is a free GeoStudio Basic license. Analyses created with a Geostudio Basic license can be included in the same file as the full-featured GeoStudio analysis, further unlocking the power of integration.IDEA StatiCa Software
Calculate Yesterday's Estimate
IDEA StatiCa Connection can design all types of welded or bolted connections, base plates, footing and anchoring. It provides precise checks, results of strength, stiffness and buckling analysis of a steel joint. Bolts, welds and concrete blocks are checked according to EN/AISC/CISC/AU/SP 16. Templates for most-used connections are available as well as wide range of predefined hot rolled and sheet welded members.Leapfrog Works
Perform 3D
NON-LINEAR ANALYSIS AND PERFORMANCE ASSESSMENT FOR 3-D STRUCTURES
Traditionally, earthquake-resistant design has been strength-based, using linear elastic analysis. Since inelastic behavior is usually allowed for strong earthquakes, this is not entirely rational. Strength-based design considers inelastic behavior only implicitly. Displacement-based (or deformation-based) design considers inelastic behavior explicitly, using nonlinear inelastic analysis. Displacement-based design recognizes that in a strong earthquake, inelastic deformation (or ductility) can be more important than strength. PERFORM-3D allows you to use displacement-based design. Procedures for displacement-based design using inelastic analysis are specified in ASCE 41, “Seismic Rehabilitation of Existing Buildings”. ASCE 41 applies to the retrofit of existing buildings, but the procedures can be applied to the design of new buildings. PERFORM-3D implements the procedures in ASCE 41. However, PERFORM-3D is a general tool for implementing displacement-based design. It is not limited to ASCE 41. The response of a structure to earthquake ground motion, whether elastic or inelastic, is highly uncertain. Capacity design is a rational way to improve the response of a structure in a strong earthquake, by deliberately controlling its behavior. Capacity design controls the inelastic behavior of a structure, by allowing inelastic behavior only in locations chosen by the designer. In these locations the structural components are designed to be ductile. The rest of the structure remains essentially elastic, and can be less ductile. Controlling the behavior in this way improves reliability, reduces the amount of damage, and can reduce construction costs. PERFORM-3D allows you to apply capacity design principles. PERFORM-3D has powerful capabilities for inelastic analysis, but it is not intended for general purpose nonlinear analysis. If you have no idea how your structure will behave when it becomes inelastic in a strong earthquake, PERFORM-3D can probably help you to identify the weak points, and hence can guide you in improving the design. However, PERFORM-3D is not intended for “design by analysis”, where the engineer expects the analysis to determine exactly how a structure will behave. PERFORM-3D is a powerful tool for implementing displacement-based design and capacity design. It will help you to produce better designs, but it will not do the engineering for you.QUAKE/W
SAFE
INTEGRATED DESIGN OF SLABS, MATS AND FOOTINGS
SAFE is the ultimate tool for designing concrete floor and foundation systems. From framing layout all the way through to detail drawing production, SAFE integrates every aspect of the engineering design process in one easy and intuitive environment. SAFE provides unmatched benefits to the engineer with its truly unique combination of power, comprehensive capabilities, and ease-of-use. SAFE couples powerful object-based modelling tools with an intuitive graphical interface, allowing the quick and efficient modelling of slabs of regular or arbitrary geometry with openings, drop panels, post-tensioning, ribs, edge beams, and slip joints, supported by columns, walls, or soil. Design is seamlessly integrated with the modelling and analysis and provides comprehensive reporting of the required reinforcement calculated based on a chosen design code. Detailed drawings may be produced effortlessly for slabs and beams designed using SAFE. SAFE may be used as a stand-alone application, or may be used in conjunction with ETABS or SAP2000 to complete analysis, design, and detailing of concrete floor plates created in ETABS or SAP2000.SAP2000
INTEGRATED SOFTWARE FOR STRUCTURAL ANALYSIS AND DESIGN
SAP2000 is general-purpose civil-engineering software ideal for the analysis and design of any type of structural system, including stadiums, towers, industrial plants, offshore structures, piping systems, buildings, dams, soils, machine parts and many others. Basic and advanced systems, ranging from 2D to 3D, of simple geometry to complex, may be modeled, analyzed, designed, and optimized using a practical and intuitive object-based modeling environment that simplifies and streamlines the engineering process. Created by engineers for effective engineering, SAP2000 is the ideal software tool for users of any experience level, designing any structural system.SEEP/W
GROUNDWATER FLOW ANALYSIS
SEEP/W is a powerful finite element software product for modeling groundwater flow in porous media. SEEP/W can model simple saturated steady-state problems or sophisticated saturated / unsaturated transient analyses with atmospheric coupling at the ground surface.
Add SEEP3D to SEEP/W to analyze 3D groundwater flow using the same comprehensive set of material models and boundary conditions.
Seequent Central
Central gives multidisciplinary teams a space to collaborate in the cloud. Whether you’re a geologist, geophysicist, engineer, manager, or stakeholder – everyone can keep abreast of project changes as they happen. Central is your shared workspace wherever you are in the world, making projects more accessible, shareable and collaborative, with all new visualisation capability.
SIGMA/W
STRESS AND DEFORMATION ANALYSIS
SIGMA/W is a powerful finite element software product for modelling stress and deformation in soil, rock, and structures. SIGMA/W analyses may range from simple linear elastic simulations to soil-structure interaction problems with nonlinear material models.
SIGMA/W enables you to analyze a broad class of problems in the civil and mining sectors due to its extensive material model library and rigorous formulation. With SIGMA/W, you can analyze complex consolidation problems, stability of soil and rock slopes, soil-structure interaction problems, and much more.
SLOPE/W
SLOPE STABILITY ANALYSIS
SLOPE/W is the leading slope stability software for soil and rock slopes. SLOPE/W can effectively analyze both simple and complex problems for a variety of slip surface shapes, pore-water pressure conditions, soil properties, and loading conditions.
With this comprehensive range of features, SLOPE/W can be used to analyze almost any slope stability problem you will encounter in your geotechnical, civil, and mining engineering projects.